Publicidad
Idiomas disponibles
Idiomas disponibles
10. Power Management Function
• It is possible to set a maximum power absorption level for the induction hob, choosing up to di erent
power ranges.
• Induction hobs are able to limit themselves automatically in order to work at lower power level, to
avoid the risk of overloading.
• It is not necessary to put any pots on the heating zones. You need to enter the power setting mode
within 60 seconds after connecting the power. You need to finish setting within 60 seconds every
step.
To enter Power Management Function
1. Firstly, Please turn on the hob. At this stage,
press zone "Boost" and "Lock" at the
same time.
2. Press "Lock" key.
3. Press zone "Boost" and "Lock" keys at the
same time again.
To switch to another level
Short press the zone "Boost" key.
.
The "S" symbol will be displayed on zone #1.
The symbol "S" will be displayed on zone #1
and symbol "E" will be displayed on zone #2.
The symbol "S" will be displayed on zone #1,
"E" will be displayed on zone #2, and "t" will
be displayed on zone #3. At the same time,
the current maximum power mode (7.4) will
be displayed on the timer indicator.
There are 6 power levels, from "7.4" to "2.5".
The timer indicator will show one of them.
"7.4" : the maximum power is 7.4kW.
"5.5" : the maximum power is 5.5kW.
"4.5" : the maximum power is 4.5kW.
"3.5" : the maximum power is 3.5kW.
"2.5" : the maximum power is 2.5kW.
24
Publicidad
