Publicidad
Idiomas disponibles
Idiomas disponibles
2. Proper and intended use
The MENZER long-neck sander LHS 225 AV /
LHS 225 VARIO AV is meant for the sanding
of walls and ceilings indoors and outdoors, for
sanding primed drywall and for the removal of
paint, adhesive and/or wallpaper residues. Only
recommended MENZER abrasives may be used.
3. Technical data and emissions
Voltage
Power consumption
Idle speed, continuous
Protection class
Driving disc
Length LHS 225 AV / LHS 225 VARIO AV
Weight
Sound pressure level
Sound power level
Uncertainty (sound power level)
Vibration emission value
Uncertainty (vibration emission value)
* Calculated according to the EN60745 test condi-
tions with new and not worn power tool and ready-
for-use abrasives. Values c hange as a result of
4 EN
The use of cutting or grinding discs and flap discs,
wire brushes or saw blades is not permitted.
For dust extraction, we recommend MENZER
industrial vacuum cleaners VC 660 M, VC 760
and VC 790 PRO.
220–240 V ~ 50 Hz
110–130 V ~ 50 Hz
110–120 V ~ 60 Hz
710 W
1000–1950 min
-1
/ II
Ø 225
1620 mm / 1550–1950 mm
4.7 kg
*79 dB(A)
*90 dB(A)
K = 3 dB
*a
< 2.5 m/s²
h
K = 3 m/s²
regular use, wear and changing work pieces and
abrasives.
4. Safety instructions
4.1 General
Attention! Read all safety notices and
instructions!
• Store the operating instructions in a safe place.
• Use the machine only as intended. Doing work
that the machine was not designed for can result
in injury to persons or damage.
• Ignored instructions and notes or negligent
compliance with these can result in electric shock,
fire and/or serious injury.
• This machine may not be used by people who
suffer from physical/mental disabilities or cognitive
disorders or who lack the necessary experience
in dealing with such equipment. Do not allow
children to use the machine!
• Store the machine out of the reach of children.
• Never allow people who have not read the oper-
ating instructions to use the machine.
• Have broken equipment fixed only by the
MENZER service department.
4.2 Safety instructions specific to the machine
• The machine may only be connected to power
sockets whose mains voltage and frequency
match the rating indicated on the nameplate of the
machine.
• Make sure that all operating controls are func-
tioning before starting work.
• Do not operate the machine when the cable, the
housing parts or other components of the equip-
ment are damaged.
• Make sure that it is not possible to unintention-
ally turn on the sander before connecting the
machine to a power outlet to avoid accidents.
• If the device turns off unintentionally, please turn
the on/off switch to position 0 and pull the mains
plug out of the outlet. Please consult Section 7 –
Troubleshooting and fault corretion, and/or contact
MENZER Service.
• Always use both hands to hold the machine,
otherwise you can lose control of the tool and
cause damage.
• Remove any tools (e.g. wrench) before switching
on the machine.
• Allow the machine to run for about 1 minute be-
fore starting the actual work – keeping the rotation
axis away from the body.
• Hold the machine only by the insulated gripping
surfaces to avoid electrical shock in case the
machine touches hidden wiring or its own power
cable.
• The sound generated when working is damag-
ing to your hearing. Wear hearing protection.
• To reduce the risk of electric shock, keep the
power cable away from the driving disc or from the
surface to be sanded. This minimizes the risk of
damage to the sheath of the cable or severing of
the cable by the abrasive and prevents the cable
from winding around your hand or arm.
• If the power cable is damaged, unplug it im-
mediately.
EN 5
Publicidad
