Eaton TRIPP LITE Serie Manual Del Usuario página 16

1. Closure Assembly
3
Strip the branching cable to a suitable length of ≥4 ft. (1.2 m) (Figure 1-24).
4
Cut the strength member of the cable from the stripped cable sheath 2.4 in.
(60 mm) to fix the cable (Figure 1-25).
16
04-067-93-47C2_revA.indb 16 04-067-93-47C2_revA.indb 16
Figure 1-24: Strip the branching cable
Figure 1-25: Strength member
Bare fiber
Bare fiber protective sleeve
Strength member
1/31/2024 10:40:53 AM 1/31/2024 10:40:53 AM