Eaton TRIPP LITE Serie Manual Del Usuario página 17

1. Closure Assembly
5
Attach the branching cable into the hole: insert the strength member, then
secure the strength member with the screw (Figure 1-26).
6
Secure the upper press clamping (Figure 1-27).
Note: When bare fiber cable is used, an EVA tube should be applied to protect the bare fiber
and insulation tape should be used to wrap the EVA tube and cable.
A
04-067-93-47C2_revA.indb 17 04-067-93-47C2_revA.indb 17
Figure 1-26: Attach the strength member
A
Figure 1-27: Secure the press clamping
Description
Quantity
Insulation Tape
1 Roll
17
1/31/2024 10:40:53 AM 1/31/2024 10:40:53 AM