Odors
If you experience unpleasant odors:
1.
Switch off the appliance with the On/Off
button ÿ.
2.
Take all food out of the appliance.
3.
Clean interior (see chapter "Cleaning the
appliance").
4.
Clean all packages.
5.
Seal strong smelling food in order to prevent
odors from forming.
6.
Switch the appliance on again.
7.
Store food in the appliance.
8.
Check whether the formation of odors is still
occurring after 24 hours.
Light (LED)
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service
or authorized technicians only.
Tips for saving energy
▯
Install the appliance in a dry, well ventilated room!
The appliance should not be installed in direct
sunlight or near a heat source (e.g. radiator,
stove).
If required, use an insulating plate.
▯
Select 560 mm niche depth.
A smaller niche depth will result in a higher
energy consumption.
▯
Allow warm food and drinks to cool down before
placing in the appliance.
▯
Thaw frozen food in the refrigerator compartment
and use the low temperature of the frozen food
to cool refrigerated food.
▯
Open the appliance as briefly as possible.
▯
Ensure that the freezer compartment door is
always closed properly.
▯
Occasionally clean the rear of the appliance
to prevent increased power consumption.
▯
The arrangement of the fittings does not affect
the energy absorption of the appliance.
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigeration units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are switching On/
Off.
Cracking
Automatic defrosting is running.
Preventing noises
The appliance is not level
Align the installation cavity with a spirit level. To do
this, use the height-adjustable feet of the cavity or
place something underneath.
Containers or storage areas wobble or stick
Please check the removable parts and re-insert them
correctly, if required.
Containers are touching
Move the containers slightly apart.
19