3 Before you begin
Before you begin
Read these instructions before you begin to install your
Before you begin
appliance.
All graphics are representative. Your appliance may vary
in appearance and features.
3.1 Removing packaging
NOTICE:
To avoid damage to the appliance, do not grip or use the
door or door handle while the appliance is being moved.
Unpack the appliance box.
1.
Fold back all 4 carton flaps fully against the carton
‒
sides.
Remove the glass tray turntable and roller ring.
‒
Carefully roll the appliance and carton over onto the
‒
top side. The appliance should be resting in the
packaging.
Pull the carton up and off the appliance.
‒
Unpack the trim kit box. DO NOT use a knife or sharp
2.
object!
Carefully break the tape then fold back all 4 carton
‒
flaps to access the trim kit accessories.
3.2 Parts included
After unpacking all the parts, check for any damage in
transit and for completeness of delivery.
The microwave and trim kit are supplied in two separate
boxes.
Appliance
Microwave
¡
Glass tray turntable with roller ring
¡
Trim kit
A
Microwave support brackets (2)
B
Trim kit brackets (2)
C
Base pan (1)
Before you begin en-us
7