Thermador MBCS Guia De Instalacion página 8

en-us Location requirements
D Trim kit frame
E Adjustment shims type
For trim kit frame
F Adjustment shims type
For trim kit frame
G Foam strips (5)
H Wood screws (9)
I Sheet metal screws (6)
J Washer screws (4)
K Gap sheet (3)
3.3 Tools and parts needed
Prepare these tools and accessories before you start to
install your appliance.
Cross head screwdriver
¡
Pencil
¡
Measuring tape
¡
Straight edge
¡
Drill with bit 1/16" (1.5 mm)
¡
Safety gloves
¡
Safety glasses
¡
Level
¡
Additional parts needed:
30" Trim kit (to be purchased separately): MBT30CS
¡
3.4 Power requirements and grounding
The outlet must be properly grounded in accordance with
all applicable codes.
Location requirements 4 Location requirements
Location requirements
4.1 Appliance dimensions
8
(2)
(2)
4.2 Installation dimensions
WARNING
This appliance may be used as a countertop, or as a built-
in unit.
For built-in installation, the appliance must be mounted
▶
at a minimum height of 36¹⁄₁₆" (916 mm).
For built-in installation, the Thermador appliance model
▶
MBCS must be installed with the dedicated Thermador
trim kit MBT30CS, according to the Installation Guide.