Publicidad
1
3
•
Pairing with another device: Place the earbuds in the charging case and leave
the case open. To enter pairing mode, press and hold the button on the
charging case for 3 seconds until the 3 LED indicators flash white in sequence
continuously.
•
Each time you power on your Soundcore earbuds, they will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
•
Mono mode: When Bluetooth connected, you can use either one of the
earbuds only by placing the other one into the charging case and closing it.
•
When powered on and connected, if either one of the earbuds is out of
battery and powered off, you can keep using the other one.
•
When you are on a call, place either one of the earbuds into the charging case,
and the microphone in the other earbud will be activated.
2
4
Soundcore
Life Note C
PAIRING
CONNECTED
3s
Soundcore
Life Note C
03 EN
Publicidad
