Publicidad
Reset
You might need to reset the earbuds if you experience any connectivity problems
or function issues.
1. Place the earbuds in the charging case and make sure they are being charged.
2. Press and hold the button on the case for 10 seconds until the 3 LED indicators
flash white 3 times and then flash white in sequence continuously. This confirms
that the reset was successful and your earbuds can be connected normally.
1
Soundcore
Google Play and the Google Play logo are
trademarks of Google Inc.
Apple and the Apple logo are trademarks of
Apple Inc.
2
10s
05 EN
Publicidad
