Sony MHC-G99AV Manual De Instrucciones página 5

Rear speaker
FM lead
(right)
antenna
(supplied)
STEP 4
to a wall
outlet !Do this connection last!
To improve the AM reception
After you connect the AM antenna, connect
a 6- to 15-meter insulated wire to the AM
terminal. Connect the y terminal to earth.
Important
Ground the external antenna from the y
terminal against lightning with the screw
clamp. To prevent a gas explosion, do not
connect the ground wire to a gas pipe.
Insulated wire
(not supplied)
F M
7 5 Ω
Screw clamp
Ground wire
(not supplied)
Front speaker
(right)
AM loop
antenna
(supplied)
STEP 2
STEP 3
STEP 1
STEP 3
Operating Voltage (for
customers outside Malay-
sia, Mexico and Australia)
Before connecting the power, set
VOLTAGE SELECTOR to the position of
the local power line voltage.
VOLTAGE SELECTOR
110-120V
A M
y
STEP 4
Power
Connect the AC power cord to a wall outlet
after you have made all the above
connections.
Center speaker
Feet
Adjusting the
220-240V
Connecting the
Rear speaker
(left)
Front speaker
(left)
to a wall outlet
Plug Adapter
If the plug of this unit does not fit your wall
outlet, attach the supplied adaptor on to the
plug (except for Latin American countries,
Australia and Malaysia).
Demo mode
The demo mode appears in the display
when you connect the AC power cord
into a wall outlet.
To deactivate the demo mode, press
DISPLAY/DEMO with the system
power turned off.
Chapter 1: Setting Up
EN
5