Bosch Professional GBH 185-LI Manual Original página 17

Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery in the manufacturer's products.
u
This is the only way in which you can protect the battery
against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Do not touch any application tools or adjacent housing
u
components shortly after operation. These can become
very hot during operation and cause burns.
The application tool may jam during drilling. Make
u
sure you have a stable footing and hold the power tool
firmly with both hands. Otherwise you could lose con-
trol of the power tool.
Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
The mounting for the suspension strap (6) and the
u
suspension strap itself do not act as fall protection.
Use the mounting for the suspension strap (6) only to at-
tach a suspension strap.
Never attach the fall protection system (24) to the
u
mounting for the suspension strap (6).
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Technical Data
Cordless rotary hammer
Article number
Rated voltage
A)
Impact rate
A)
Rated speed
– Clockwise
– Anticlockwise
Bosch Power Tools
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS plus drill chuck
(2) SDS plus tool holder
(3) Dust protection cap
(4) Locking sleeve
(5) Vibration damping
(6) Mounting for suspension strap
a)
(7) Battery release button
(8) Rotational direction switch
(9) Handle (insulated gripping surface)
(10) On/off switch
a)
(11) Rechargeable battery
(12) Release button for impact/mode selector switch
(13) Impact/mode selector switch
(14) Worklight
(15) Button for depth stop adjustment
(16) Auxiliary handle (insulated gripping surface)
(17) Depth stop
(18) Securing screw for keyed chuck
a)
(19) Keyed chuck
(20) SDS plus shank for drill chuck
(21) Chuck key
(22) Universal holder with SDS plus shank
(23) Attachment area for the fall protection system on
the power tool
b)
(24) Fall protection system
(25) Fall protection system anchorage point fixer
a) This accessory is not part of the standard scope of delivery.
b) This accessory described here is not included with the
product as standard, nor is it part of the Bosch range of ac-
cessories.
V=
–1
min
–1
min
–1
min
English | 17
a)
b)
b)
GBH 185-LI
3 611 J24 0..
18
0−4675
0−1050
0−1050
1 609 92A 9ER | (24.05.2024)