Roger Technology B71/BCHP Instrucciones Y Advertencias Para El Instalador página 9

sostanze inquinanti o pericolose, se disperse potrebbero
provocare effetti dannosi sull'ambiente e sulla salute
umana.
12
Informazioni aggiuntive e contatti
Tutti i diritti relativi alla presente pubblicazione sono di
proprietà esclusiva di ROGER TECHNOLOGY. ROGER
TECHNOLOGY si riserva il diritto di apportare eventuali
modifiche senza preavviso. Copie, scansioni, ritocchi
o modifiche sono espressamente vietate senza un
preventivo consenso scritto di ROGER TECHNOLOGY.
SERVIZIO CLIENTI ROGER TECHNOLOGY:
attivo: dal lunedì al venerdì
dalle 8:00 alle 12:00 - dalle 13:30 alle 17:30
Telefono: +39 041 5937023
E-mail: service@rogertechnology.it
Skype: service_rogertechnology
13
Dichiarazione di Conformità
Il sottoscritto, rappresentante il seguente costruttore:
Roger Technology - Via Botticelli 8, 31021 Bonisiolo di
Mogliano V.to (TV)
DICHIARA che l'apparecchiatura descritta in appresso:
Descrizione: batterie e carica batterie
Modello: B71/BCHP
È conforme alle disposizioni legislative che traspongono
le seguenti direttive:
– 2014/35/UE;
– 2014/30/UE;
– 2011/65/UE
E che sono state applicate tutte le norme e/o specifiche
tecniche di seguito indicate:
EN 61000-6-3;
EN 61000-6-2;
EN 60335-1
Luogo: Mogliano V.to
Data: 24-03-2017 Firma
1
General safety precautions
Warning: incorrect installation may cause severe
damage or injury. Read the instructions carefully
before installing the product.
This installation manual is intended for qualified
personnel only. ROGER TECHNOLOGY cannot be held
responsible for any damage or injury due to improper
use or any use other the intended usage indicated in this
manual.
Installation, electrical connections and adjustments
must be performed by qualified personnel, in accordance
with best practices and in compliance with applicable
regulations.
Before installing the product, make sure it is in perfect
condition.
Disconnect the mains electrical power before performing
any work. Only use original spare parts when repairing or
replacing products.
The packaging materials (plastic, polystyrene, etc.)
should not be discarded in the environment or left within
reach of children, as they are a potential source of danger.
2
Symbols
The symbols and their meaning in the manual or on the
product label are indicated below.
Generic danger
Important safety
operations and situations in which the
personnel involved must pay close attention.
Refer to the Installation and use instructions
Indicates the obligation to refer to the manual
or original document, which must be available
for future use and must not be damaged in any
way.
Indicates the admissible temperature range.
Direct current (DC)
Symbol for the product disposal according to
the WEEE directive.
3
Product description
The B71/BCHP HW02 battery charger board may be
used to charge two 12V
connected in series.
In the event of mains power loss, the battery charger
provides auxiliary power to the control unit (EDGE1,
B70/1DCHP or B70/1THP).
In addition, it performs the function of limiting the
overvoltage generated, on the DC supply of the motor,
during braking phases (High Speed or Reversible motors
only).
Two battery kits are available, complete with battery
charger board and two 12V
box, available is B71/BCHP/EXT.
information. Indicates
4500 mAh lead acid batteries
4500 mAh batteries and
9 9