Publicidad
Idiomas disponibles
Idiomas disponibles
•
IMPORTANT: Do not drill into any pipes or mains cables beneath the surface during
EN
weight of the product.
5. USE
5.1
1.
2. Insert assembled parts into the dust container (9).
3. Fix the dust container (9) onto the main unit (10). Make sure it locks in place.
4. Insert the battery (16) into the main unit (10). Also make sure it locks in place.
5. Connect the extension tube (5) to the main unit (10).
6.
NOTE: The 2-in-1 tool (17) can also be directly connected to the main unit (10).
5.2 Charging
1. Connect the provided power adapter (15) to a suitable electrical outlet.
2. Place the vacuum cleaner on the wall bracket (14).
3.
take about 3-4 hours.
4. Once the product is fully charged, 3 battery indicators (3) light up steadily.
NOTE: The on/off key (1) is deactivated during charging process. Product cannot be switched
on.
5.3 Vacuuming
1. To switch the product on, press the on/off key (1). To switch off, press it again.
2. The battery indicators (3) light up steadily during operation. Each indicator corresponds to
a higher battery charge level.
3. Press the speed selection key (+) (2) to toggle between high and low vacuuming speed.
5.4 Using the 2-in-1 tool
The 2-in-1 tool (17) can be used as crevice tool or a brush.
Brush: Intended to clean furnitures, home appliances and bookshelf.
Crevice tool: Intended to clean sofas gap, wall corners, stairs, keyboards and other narrow places.
2
1
8
Publicidad
