6. CLEANING AND MAINTENANCE
6.1 Cleaning
Warning! When not in use or before cleaning disconnect the product from the electrical outlet.
Warning! During cleaning or operation do not immerse the electrical parts of the product in
water or other liquids. Never hold the product under running water.
•
afterwards.
•
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the casing.
6.2
1. Press the main body release button (4) and remove the extension tube (5).
2. Press the lock on the dust container (9) and empty it over a bin.
3.
4.
necessary. Dry afterwards.
•
IMPORTANT:
dryer. Risk of damage.
6.3
NOTE: The vacuuming performance might decrease
overtime due to accumulation of lint, hairs or other
obstructions in a regular intervals.
1. Slide the lock located on the side of the motorized
2. Clean the obstructions and install the brush roll
back in a reverse order.
6.4
1. Press the battery release button (11) and remove the battery (16).
2. Secure the charging pins with an electrical tape.
3. Dispose the battery according to local regulations.
Do not put used batteries, nickel cadmium, rechargeable, round cell or starter batteries
in with the household rubbish. Take them to an appropriate disposal/collection site.
Slide the lock
to open
9
EN