AXXAIR DC65-MA1 Manual De Instrucciones página 29

INNOVATIVE ORBITAL SOLUTIONS
2 Security instructions
2.1 Requirements for the person responsible:
In the workshop / outside / onsite
The head of the company is responsible for the security in the machine's workplace and must only allow
qualified technicians to use the machine in the danger area.
About staff's safety
The instructions described below must be observed and applied for the operator's safety. The use of
personal protective equipment (PPE) is mandatory.
2.2 Intended use:
The application field of the DC65 machine line is wide but it is mostly designated for facing, facing in
position, tubes de-burring and fittings.
The machine is designed to be used in a production workshop or in a worksite. Using a DC65 cordless
makes work more efficient and allows access to hard-to-reach areas thanks to its small size.
WARNING, do not modify any parts of the machine!
The user will be the only person responsible for damages caused by improper use.
Inspect the machine as soon as you receive it for any expedition damages.
Contact immediately AXXAIR if there are any defects or questions about the machine.
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
Original Instruction - ENGLISH
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - commerce@axxair.com - www.axxair.com
- 29 -