AXXAIR DC65-MA1 Manual De Instrucciones página 32

INNOVATIVE ORBITAL SOLUTIONS
Sharp cutting edges exposed.
Serious injury (fingers cut)
Projection of hot and sharp-edged shavings.
Various injuries (cuts/burns) or material damage
WARNING
Falling of heavy objects (tube).
Various injuries (crushing) or material damage.
WARNING
Danger caused by long noise exposition.
The noise may cause (provoke) a loss of hearing capacity
WARNING
Accidental start-up of the machine
Various injuries or material damage.
WARNING
Join experience
Do not put your finger close to the cutting tool when the machine is
powered.
Do not remove the protection.
Wear safety gloves.
Do not use the machine and do not touch chips without protection.
Wear protective glasses.
Wear safety gloves.
Do not manipulate heavy objects without protection.
Wear safety boots.
Do not use the machine without protection.
Do not use the machine for a long period.
Wear ear protection.
Do not carry the machine with your finger on the trigger.
Do not plug in the machine with the switch in ON position.
Remove all source of energy from the machine before working on it.
Make sure the switch is in OFF position before powering, picking up or
carrying the machine.
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
Original Instruction - ENGLISH
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - commerce@axxair.com - www.axxair.com
- 32 -