AXXAIR DC65-MA1 Manual De Instrucciones página 42

INNOVATIVE ORBITAL SOLUTIONS
5 ACCESSORIES
5.1 Collets:
DCM65-XX
Stainless-steel collets for DC65 diameter XX.xx in mm (between 3.00 mm (0.118") to 63.50 mm (2.500"))
Note: To order, you must indicate the outside diameter (OD) of the tube in mm.
Spacer for DC25's collets :
5.2
5.3 Tool holder for bevealing :
Reference
DC65-P300
DC65-P450
- Bevelling possible over the whole of the machine's range (0,1 to 2,5
inches),
- If squaring and bevelling, range between 20 and 53 mm diameter, max
- Tool holders are supplied without blades
Join experience
Reference Description
DCM6525 Spacer
Spacer for fitting DC25 collets on the DC65
Description
Tool holder for Bevelling at 30°
Tool holder for bevelling at 45°
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
Original Instruction - ENGLISH
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - commerce@axxair.com - www.axxair.com
- 42 -