AXXAIR DC65-MA1 Manual De Instrucciones página 40

INNOVATIVE ORBITAL SOLUTIONS
4.2 Collets assembly:
Delete any energy sources supplying the machine before changing the collets
WARNING

Verify the outside diameter (OD) of the tube to be processed.

Choose the jaws depending on the diameter of the tube to be
processed.

Position the bottom collet (referential collet) then tighten screw IDIN912-
M3x12 (tightening torque = 1.23 Nm, 2.5 mm Allen key supplied).
Warning, if the jaw touches the inner face of the bore, the jaw
tightening system will be jammed.
Join experience
Ø in mm
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
Original Instruction - ENGLISH
Ø in inch
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - commerce@axxair.com - www.axxair.com
- 40 -