Publicidad
Idiomas disponibles
Idiomas disponibles
5. To stop the tool, release the trigger.
6. To prevent to press the trigger, use the trigger lock (push it from left side to right
side) to lock the trigger.
POLISHING
Always use side or bail handle for proper control. Move the polisher back and forth in
long, sweeping strokes. Too much pressure, the wrong angle or improper motion may
cause swirl marks or burning. For detailed polishing instructions, read the instructions
provide with the finishes, waxes and polishes.
PREVENTING BURNING THROUGH PAINT
It is easy to burn through the paint on a surface. This can occur if you polish at too high
a speed or if you allow the polishing pad to stay in one spot for even a short period of
time. To prevent burning through paint, use very light pressure and keep the polisher
moving constantly, especially when working near edges or where there are abrupt
changes in the contour of the work surface. Be particularly careful when using higher
RPM's which are more likely to burn through paint.
WARNING
Snagging may cause the tool to kick back and the operator to suddenly lose control of the tool. Always use
side handle to maintain control.
1English1
Fig. 7
To reduce the risk of injury, follow instructions for preventing snagging.
English
Fig. 8
-11
Publicidad
