Publicidad
Idiomas disponibles
Idiomas disponibles
No Load Speed
8 settings
Spindle Thread Size
Tool Weight(w/o battery 2.5Ah)
Tool Weight(w battery 2.5Ah)
WARNING
− that the vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used; and
− of the need to identify safety measures to protect the operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to the trigger time).
Charger Model Number
Battery Pack Model Number
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery release button (11), and pull
battery pack out of tool. (see Fig. 2)
TO INSTALL BATTERY PACK: Align rails on the tool with the four tabs on the
battery pack, and push battery pack onto tool until it locks in place. (see Fig. 2)
BAIL HANDLE
The bail handle for your polisher can be fitted to both sockets of the gear case. Select
one of the three angle positions that offers best control (forward, 90∘ or back). Insert
1English1
.../min
inch
Input
Output
Output Amps
Input Power
Type
Voltage
Capacity
ASSEMBLY
Fig. 2
English
0-800/0-1000/0-1200/0-1400
0-1600/0-1800/0-2000/0-2200
5/8" x 11
5.35 lbs / 2.43 kg
7.48 lbs / 3.40 kg
DC60UN26-C25
100-240 V a.c., 50~60 Hz
62 V d.c.
2.5A
≦190W
B6029LB / B6035LE
Li-ion
60V
2.5Ah / 4.0Ah
-8
Publicidad
