Publicidad
Idiomas disponibles
Idiomas disponibles
Polaris
FREEDOM
PLUS Cordless Robotic Cleaner | Owner's Manual
®
™
Figure 14. Secure the Hook
3.
Pull up the cleaner by the handle and hold
vertically to let the water drain into the pool.
Figure 15. Drain the Cleaner
4.
Charge the cleaner on the charging caddy out
of direct sunlight.
Figure 16. Store the Cleaner
NOTE: For best results, dry the cleaner and base
charging contacts before charging. Periodically
clean the charging contacts. See maintenance
section.
Section 4. Installing iAquaLink
The iAquaLink app is available for download from
the App Store or Google Play.
Before you begin installation, make sure you
have the following:
• Robotic cleaner is on charging caddy
• Charging caddy is connected and plugged
into a GFCI outlet
• Smart device (phone) with Wi-Fi and
Bluetooth
®
enabled
• Wi-Fi router with sufficient signal strength
at the charging station
IMPORTANT
Have your Wi-Fi network password available
4.1
Download the App
Install or update the iAquaLink app from the
App Store or Google Play.
Once the download is complete, select the
iAquaLink icon on your smart device to open
the app.
4.2
Sign Up and Log In
Click Sign Up to create a new user account. Or, if
you previously set up an iAquaLink account, click
Log In to access your systems.
Complete all required fields in the Account Setup
page and agree to the Terms and Conditions.
WARNING
Do not enter pool while the robotic cleaner is in water.
4.3
Configure the System
1.
On the My Systems page, click + in the upper
right-hand corner to add a system.
®
Page 11
Publicidad
