Descargar Imprimir esta página

cecotec BOLERO SQUAD 2001 Manual De Instrucciones página 69

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
9
5. CLEANING AND MAINTENANCE
Dirt
Cleaning
Usual dirt
1. Unplug the induction hob from
on glass
(fingerprints,
2. Apply a worktop cleaner while
marks, food
stains,etc.).
3. Rinse and dry with a clean cloth
4. Reconnect the induction hob
Spills of sugar
Remove them immediately with a
and other hot
spatula or a suitable scraper for
melted food on
induction hobs, but be careful with
glass.
the hot cooking zone:
1. Unplug the induction hob from
2. Hold the cookware at a 30°
3. Clean the dirt or spill with a
4. Follow steps 2 to 4 from the
stir-frying at a higher temperature
-
grilling
-
boiling soup
-
boiling water
-
the mains.
the glass is still warm (not hot).
or a paper towel.
to the mains if you wish to
continue using it.
the mains.
angle and scrape the dirt or
spillage onto a cool area of the
hob.
cloth or paper towel.
'Usual dirt on glass' section.
Important
If you unplug the induction hob from
the mains, the hot surface indicator
will disappear, but the cooking zone
will be hot. Be especially careful.
Strong or some nylon scouring
pads and strong/abrasive cleaning
products can scratch the glass.
Always read the label to check if your
cleaning product or scouring pad is
suitable.
Never leave any cleaning remains
on the induction hob: glass may get
stained.
Remove melted and sugary food
stains or spills as soon as possible.
If left to cool on the glass, they may
be difficult to remove or may even
permanently damage the glass
surface.
BOLERO SQUAD I 2001
ENGLISH
69

Publicidad

loading