Publicidad
Idiomas disponibles
Idiomas disponibles
Cooling
1. Press the power button (1) and select cool (2) on the operating panel or press
the selection button on the remote control and select the cool function.
2. Press the
16°C and 31°C).
3. 3. Press the
Air circulation
1. Press the power button (1) and select fan (2) on the operating panel or press the
selection button on the remote control and select the fan function.
2. Press the
Dehumidification
1. Press the power button (1) and select dehum (2) on the operating panel or press
the selection button (see point 1 cooling) on the remote control and select the
dehum function.
2. The wind speed is automatically at low speed (this cannot be changed).
3. When using this function a discharge hose or something similar must be
connected to discharge condensation water.
4. Remove the cap on the back of the appliance.
5. Mount the end of a discharge hose to the drain and place the other end in a
bucket lower than the drain of the appliance, so that the condense water can be
discharged properly.
and
button to set the required room temperature (between
button to adjust the wind speed (low or high)
button to adjust the wind speed (low or high)
Publicidad
