Publicidad
Idiomas disponibles
Idiomas disponibles
Caution:
Condensation water may run out of the drain when the screw cap is removed
•
and the appliance has been used in cooling mode. Keep a drip tray at hand
when removing the screw cap, in order to collect the condensation water.
Make sure the discharge hose for the condensation water properly descends
•
and is not higher than the drain of the appliance.
When using this position, the air discharge hose does not have to be connected.
•
When using the cooling position, it is recommended to not discharge the
•
condensation water continuously, but to close the screw cap again. In this way
the appliance is able to provide its best performance.
Publicidad
