Publicidad
Idiomas disponibles
Idiomas disponibles
Remote control
1. Power: Press
2. Timer: press
3. Down: Press
settings.
4. Mode: press
dehumidifying mode.
5. Up: press
settings.
6. Fan: press
7. Sleep Mode: Press
Aim the remote control at the appliance. The range of the remote control is approx. 4
meters (without obstacles between the appliance and the remote control).
Insert two AAA 1.5 Volt batteries (not included) in the remote control.
Note:
When the remote control is being replaced or will no longer be used, remove the
•
batteries and dispose them in accordance with applicable legislation, as they are
harmful to the environment.
Do not mix old and new batteries. Do not use a mix of alkaline, standard
•
(carbon-zinc) or chargeable (nickel-cadmium) batteries.
Batteries could explode or leak when exposed to open fire. Hand in batteries at a
•
waste collection facility or recognized waste collection point.
Remove the batteries from the remote control when the appliance is not being
•
used for a longer period of time (winter storage) and keep them on a cool, dry
place.
3. BEFORE USING FOR THE FIRST TIME
Follow these instructions when using the appliance for the first time: Carefully
unpack the air conditioner and all accessories and remove all packaging material
and any promotional stickers.
Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have
occurred during transport.
Place the appliance on a sturdy, flat surface and make sure there is enough space
to turn the device on or off.
to set the timer.
to reduce temperature and timer
to switch between cooling, fan and
to increase temperature and timer
to select high and low fan speed.
to turn on the sleep mode.
Publicidad
