Publicidad
Idiomas disponibles
Idiomas disponibles
Control setting
1.Power key
2. Mode selection key
3. Sleep key
When the machine is powered on for the first time, you will hear a small
and the machine will get into standby status.
1. Power Key: press the key to turn on and turn off the machine. In the
case of power on, press the key to turn off the machine; in the case of
power off, press the key to turn on the machine.
2. Mode Selection Key: In the case of power on, press the key to switch
between cooling → dehumidifying → fan → cooling → ... mode.
3. Sleep Mode:
In the cooling mode, press the up and fan key to turn on the sleep mode,
then the unit will work on energy-saving and quiet type.
4/5. Up Key and Down Key: press the two keys to change the
temperature or setting time, operate as follows:
While setting temperature, press up key or down key to select the
required temperature (not available in fan or dehumidifying mode).
While setting time, press up key or down key to select the required time.
6. Fan Speed Selection Key:
In cooling mode, press this key to select high or low fan speed. In fan
mode, press this key to select high or low fan speed. In dehumidification
mode, pressing the key has no effect and the fan will always run at low
speed.
7. Timing Key:
In the case of power on, press the key to close timing; in the case of
power off, press the key to open timing. Press the key, when the timing
symbol flashes, press up and down key to select the required timing
value. Timing values can be set in 1-24 hours and the timing value is
adjusted up or down by one hour.
4. Down key
5. Up key
6. Fan speed selection key
7. Timer key
beep,
Publicidad
