Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
parts. This will ensure that the safety
of the power tool is maintained.
Additional safety
instructions
WARNING! Danger to health! The
device is not suitable for sanding materials
containing lead and asbestos.
WARNING! Sanding may produce
harmful dusts (e.g. metals or some types
of wood) that may be hazardous to the
operator or nearby persons. Make sure
that the workplace is well ventilated. Al-
ways wear safety goggles, safety gloves
and respiratory protection.
• Use clamps or another practical
way to secure and support the
workpiece to a stable platform.
Holding the workpiece by your hand or
against the body leaves it unstable and
may lead to loss of control.
• Only use the power tool for dry
sanding. Do not scrape moist
materials. Penetration of water into
the electrical device increases the risk
of electric shock.
• Avoid overheating the sanded
object and the sander itself. Pos-
sible fire hazard.
• The workpiece gets hot during
sanding. Do not touch the ma-
chined area, allow it to cool
down. There is a risk of burns. Do not
use coolants or the like.
• Always empty the dust contain-
er before work breaks. Sanding
dust in the dust sack, micro filter, pa-
per sack (or in the filter sack or extrac-
tion system filter) can self-ignite under
unfavourable conditions such as flying
sparks caused by sanding metals. Par-
ticular hazards are caused if the sand-
ing dust is mixed with paint, polyureth-
ane residues or other chemical sub-
24
stances, or if the sanded object is hot
after long working periods.
• Always wait until the power
tool has come to a complete
stop before placing it down. The
application tool can jam and cause
you to lose control of the power tool.
• Use suitable detectors to de-
termine if there are hidden sup-
ply lines or contact the local util-
ity company for assistance. Con-
tact with electric cables can cause fire
and electric shock. Damaging gas lines
can lead to explosion. Breaking water
pipes causes property damage.
• Connect the device only to a power
outlet with a residual current circuit
breaker (FI switch) of rated residual
current no more than 30 mA.
• If the power cord of this device is dam-
aged, it must be replaced by the man-
ufacturer, their customer service or by
a similarly qualified person in order
to avoid hazards. contact the service
centre.
• Only use accessories recom-
mended by PARKSIDE. Unsuitable
accessories may cause electric shock
or fire.
Residual risks
There will always be residual risks even
if you operate this power tool according
to the instructions. The following hazards
may occur in connection with the type and
design of this power tool:
• Eye damage if no suitable eye protec-
tion is worn.
• Lung damage if suitable respiratory
protection is not worn.
• Hearing damage if suitable ear protec-
tion is not worn.
• Health injuries resulting from the effect
of vibration on the hands and arms in
Publicidad
