Publicidad
Idiomas disponibles
Idiomas disponibles
8. Gett ing started
You can use the main play functions on your audio system using the buttons on the applian-
ce. In addition to the basic controls, the remote control also provides additional options for
using all functions of your appliance.
In this user manual, we refer to the remote control buttons. If we do refer to the controls on
the appliance itself, we will clearly indicate this.
8.1. Switching on the appliance/standby
Press the
button to switch on the appliance.
Press the
button again to return the appliance to standby mode. The time will be di-
splayed.
After switching on for the first time, the appliance performs the initial set-up as described
below.
The appliance uses a small amount of electricity even when it is switched off. To completely
switch off the appliance, unplug it from the power socket.
8.2. Operation in the menus
The appliance menus are controlled in the same way in all operating modes. In general,
– use the arrow buttons
– press the OK button to confirm a selection
– press
to return to the previous step/menu
– select characters on the display keypad using
0 –9 (ABC...WXYZ) buttons. To delete a character, select BKSP and if you want to
cancel the entry, select CANCEL .
– Any activated menu items are marked with an *.
– If there is another submenu for a menu, this is indicated with a >.
8.3. Initial set-up
When the appliance is started for the first time, it runs through the initial set-up to configure
the settings for the language, date/time and network.
First select the desired language.
Follow the instructions to agree to the data protection provisions.
At the prompt SETUP WIZARD START NOW?, select YES and start the set-up
wizard.
If you select NO, in the next window you can select whether the wizard will start the next
time the appliance is switched on.
to select an option or a menu
or by repeatedly pressing the
DE
FR
NL
ES
IT
EN
181
Publicidad
