Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
INSTALLATION INSTRUCTIONS
•
Use a level to draw the cooktop centerline location. Draw the line to ceiling height.
•
Use a level to draw the cooktop surface location
1.
INSTALL BACK SPLASH:
A. Remove packaging.
B. Place back splash against the wall and match the centerline and cooktop
surface.
C. Use M3.5x30mm self tapping screws to fix back splash into wall through the
holes at top and bottom of back splash (2x at top,2x at bottom).
NOTE: Make sure screws install at vertical studs of wall as more as possible.
INSTALL BACK BRACKET ONTO THE WALL
2.
A. Remove packaging
B. Place back bracket against the wall and match the centerline and top of back splash
C. Use M3.5x30mm self tapping screws to fix back bracket to the wall through the hole at top, middle, bottom of
back bracket(4x at top,4x at middle,4x at bottom)
NOTE: Make sure screws install at vertical studs of wall as more as possible
Side View
Centerline
4x
W
4x
A
Back Bracket
L
L
4x
Centerline
Centerline
Back splash
11
Cooktop
Surface
Top of
Back splash
Publicidad
