Publicidad
Idiomas disponibles
Idiomas disponibles
Hood Controls
CONTROLS
1. Power. Turns fan on and off.
2. Wifi Indicator.
3. Fan. Toggles through low, medium, high, and boost.
4. Chef Connect Indicator.
5. Light. Toggles through High, Medium, Low
6. Indoor Air Quality (IAQ) LED Indicator.
Changes color as indoor air quality changes. Unit
must be commissioned to Wi-Fi for IAQ sensor to
become operational.
DISCLAIMER
Limitations on Indoor Air Quality Monitoring: The hood is intended to be used only to provide a general
awareness of changes of levels of certain components of indoor air quality near the hood rather than absolute
measurements of any given component and/or measurement against any given standard. Variations in readings may
occur due to any number of factors, including ventilation conditions, environmental influences, cooking activities, and
sensor limitations. Any observations or readings provided by this product are for informational purposes only and
may not be utilized as a substitute for or in the development of any professional advice, assessment, or diagnosis of
any type.
WI-FI CONNECT
CONNECTING YOUR WI-FI ENABLED HOOD
Your hood is designed to provide you with two-way
communication between your appliance and smart
devices. By using the SmartHQ
be able to control hood operations such as fan speed,
light intensity, and night light scheduling using your
smartphone or tablet*.
For the best experience, prior to beginning:
• Download the SmartHQ
account.
NOTE: New users must verify their email address to
CHEF CONNECT
CHEF CONNECT OPERATION BLUETOOTH
To pair with another device:
Press and hold the Light button for 3 seconds. The
indicator light will blink until the hood is paired with the
range or other device. If the pairing is successful, the
Bluetooth
indicator will turn on and become solid. It will
®
time out after 2 minutes if the pairing is not completed,
after which the pairing sequence will need to be
restarted.
To cancel pairing:
Hold the Light button down for 3 seconds and the
indicator light will stop blinking.
Changing the Default Sync Settings:
The factory Default Sync Settings for the light will be
49-7000239 Rev. 1
TM
mobile app, you will
app and sign in or create an
TM
®
CONNECTION
1
2
complete the sign in process.
• Have your home Wi-Fi network password available.
To connect your range to Wi-Fi, touch and hold the
FAN button for 3 seconds. The Wi-Fi indicator light will
start flashing. Once your hood is connected, launch
the SmartHQ
TM
app and tap on your hood to explore.
Apply all software upgrades if prompted to ensure your
hood has the latest features. If you have issues with the
connection process, please call 800.220.6899 and ask
for assistance with wireless connectivity.
* Compatible Apple or Android devices and home Wi-Fi network
required.
the brightest and the setting for the fan will be OFF. The
user can change the settings by pressing and holding
the Light button for 10 seconds. This will enter the
Default Settings Mode. Once in this mode, the backlights
for all buttons will blink on/off indefinitely and the fan
and light will switch to the current settings, so the user
knows what the current default value is. At this time, set
the light and fan to the desired default levels using the
Light and Fan buttons. Once satisfied with the selection,
press and hold the Power button for 10 seconds, which
will exit this mode. At that time the backlights will stop
blinking and the state of the fan and light will change
back to their prior state before entering the Default
Settings Mode.
6
3
4
5
5
Publicidad
