Giordani EASY CLUB Instrucciones página 27

G
UK
iordani
STROLLER
ASSEMBLY OF THE FRONT WHEELS
WARNING: Before use, ensure that the wheel
units are safely locked into position.
OPENING THE STROLLER
WARNING: When opening the stroller, ensure
that your child is at a safe distance. During
these operations, make sure that the movable
parts of the stroller do not come into contact
with your child.
1. Fit the front wheel unit to the stroller and lock
it into position. Repeat this operation for the
other wheel unit.
2. Fit the rear wheel to the stroller and lock it
into position. Repeat this operation for the
other wheel unit.
3. Open the frame, first of all releasing the front
lock as shown in the picture, then pull the
handle.
4. The frame is as shown in the figure.
5. Press the button and pull the handle upwards.
6. The frame is fully opened.
7. Put the seat on the main frame, then pull the
seat forward as shown in the picture.
8. Then press the adjustment button and release
the second locking device to fully open the
seat.
9. The stroller is now fully open.
OPERATING THE REAR BRAKE
WARNING: Always apply the brake when the
stroller is stationary. Never leave your child
unattended. Never leave the stroller on a
sloped surface with a child seated in it, even
with the brakes applied.
10. Push the rear brake lever down with your foot
to lock the brakes.
11. To release the brake push the rear brake lever
upwards.
USING THE SAFETY HARNESS
12. To open the left waist safety harness press
the button on the buckle and pull the strap
outwards.
13. Proceed in a mirror-like manner for the right
belt.
GR328-Modulare_EASY CLUB_Libretto_MOD_v5.indd 27 GR328-Modulare_EASY CLUB_Libretto_MOD_v5.indd 27
E C
modular system
asy lub
(FROM 0 TO 36 MONTHS APPROXIMATELY)
STORAGE BASKET
WARNING: Do not load the storage basket with
weights over 2.5 kg.
14. The stroller is equipped with a storage basket.
Fix the storage basket by fastening the straps
around the stroller's frame, as shown in the
picture.
OPERATING THE SEAT
15. Press the indicated button and lift the seat to
remove it.
16. To place the seat introduce the sides of the seat
in the specific housings as shown in the figure.
17. Put the seat on the frame as shown in the picture.
18. Press the button to adjust the backrest.
LOCKING THE FRONT SWIVEL WHEELS
19. To lock the swivel wheels, lower the locking
levers.
20. To unlock the swivel wheels, lift the locking
levers.
REMOVING THE FRONT WHEELS
21. To remove the swivel wheels, press the button
as shown in the figure.
REMOVING THE REAR WHEELS
22. Press the indicated button and remove the
wheel then repeat this operation for the other
wheel unit.
OPERATING THE CANOPY
23. Press the indicated button to remove the
canopy. Repeat this operation for the other side.
24. To fit the canopy, introduce the canopy in
the specific housings as shown in the picture.
Repeat this operation for the other side.
OPERATING THE FOOTREST
25. To adjust the footrest press the plastic button
under it.
OPERATING THE CAR SEAT ADAPTER (IF ANY)
26. Introduce the adapter in the specific housings as
shown in the picture.
27. When you hear a click, the car seat has been
properly fixed.
28. Press the button and lift the seat to remove it.
Repeat this operation for the other side.
27
19/05/23 15:29 19/05/23 15:29