Descargar Imprimir esta página

cecotec MOUNTAIN MILLOR Manual De Instrucciones página 8

Bicicleta eléctrica

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
a significant impact on the rider's turning and braking
response. Incorrectly adjusted handlebars can cause
stability problems when turning, which can result in loss of
control of the bicycle. In addition, a loose handlebars can
affect the ability to respond to the braking force, as the force
applied in the brake levers will not be transmitted efficiently
to the brakes. This may result in a slower response time or a
reduction in braking power.
- Users are strongly advised not to perform pinion exchanges
or any other modifications to the electric bicycle drivetrain
using non-original parts. The use of original spare parts
guarantees the compatibility, quality and expected
performance of the electric bike.
- Any tampering with the electric bicycle may void the
warranty provided by the manufacturer. This may include
the exchange of parts with non-original components,
unauthorised modifications or any other action that alters
the original design and operation of the bicycle.
- The user is responsible for using the electric bicycle in
accordance with the instructions and recommendations
provided in the manual. Any improper handling is the
responsibility of the user and may result in personal injury,
damage to the bicycle or damage to third parties.
- The use of bicycle trailers or towing bicycles is not permitted
with this E-bike. The use of bicycle trailers or towed bicycles
may compromise the safety and performance of the E-bike
and will void the product warranty.
- The mechanism shall mark the ends of the fork when closed
in the locked position.
- The installation and use of accessories, such as trailers or
towing bicycles, is not recommended as this would exceed
the maximum weight supported by the electric bicycle; and
14
MOUNTAIN MILLOR
it would significantly affect the electronic components and
could considerably reduce their lifespan or even lead to their
failure.
- For safety reasons and to preserve the optimum performance
of this electric bicycle, do not use bicycle trailers and child
seats on this model. The installation of bicycle trailers or
child seats could affect the balance, stability, and safe
operation of the electric bicycle.
- Be sure to charge the battery of the electric bike only indoors,
in a dry and protected place. Avoid exposing the charger
and battery to adverse weather conditions, such as rain or
moisture, to prevent damage and ensure safe charging.
- Avoid overcharging the battery: disconnect the charger
once the battery is fully charged. Avoid leaving the battery
connected to the charger for a prolonged period of time, as
overcharging may affect its lifespan and efficiency.
- Do not disassemble or modify the battery. Do not attempt to
disassemble, repair, or modify it, as this may cause damage
or safety hazards.
- WARNING: to recharge the battery, use only the removable
power supply unit supplied with the device, reference
number GPLC084V42Y.
- The appliance is supplied with a battery, do not burn it, or
expose it to high temperatures, as it may explode.
- Leaks from the battery or cells can occur under extreme
conditions. Do not touch any liquid that leaks from the battery.
If the liquid gets into contact with skin, wash immediately
with soap and water. If the liquid gets into the eyes, wash
them immediately with clean water for a minimum of 10
minutes and seek medical attention. Wear gloves to handle
the battery and dispose of it immediately in accordance with
local regulations.
15
MOUNTAIN MILLOR

Publicidad

loading

Este manual también es adecuado para:

07219