Publicidad
Idiomas disponibles
Idiomas disponibles
STARTUP
4
STARTUP
Press the pusher stem inside the coating
i
material inlet (4) downwards before starting
the operation. This ensures that the valve is not
blocked or clogged.
4.1
UNIT WITH SUCTION SYSTEM (A)
1. Ensure that the sealing surfaces of the connections are
clean. Ensure that the red inlet (1) is inserted in the coating
material inlet (4).
DO NOT REMOVE THE RED INLET. MAKE SURE IT IS IN
PLACE INSIDE THE MATERIAL INLET (4).
2. Use the enclosed 41 mm wrench to screw the union nut
(2) at the suction hose (3) onto the coating material inlet
(4) and tighten it.
3. Put the return hose (5) on the connection (6) and fix it with
the clamp (7).
A
5
7
6
4
10
4.2
UNIT WITH OPTIONAL HOPPER (B)
1. Ensure that the sealing surfaces of the connections are
clean. Ensure that the red inlet (1) is inserted in the coating
material inlet (4).
2. Put the return hose (5) on the connection (6) and fix it with
the clamp (7).
3. Screw the upper hopper (8) onto the coating material inlet
(4).
B
8
5
7
11
6
3
4
2
9
1
ELITE 2000
1
Publicidad
