Publicidad
Idiomas disponibles
Idiomas disponibles
PETS: To ensure your pet's safety, do not use this product if parts are missing, damaged or
worn. Sure Petcare recommends the cat flap is used with your pet's implanted microchip,
however it may also be operated using the Sure Petcare RFID Collar Tag. If using a collar tag,
it must be used with a safety collar which incorporates a breakaway buckle. Sure Petcare
cannot accept liability for any injury or death caused by a pet's collar.
Fitting your cat flap in a wood or plastic door
INSTALLATION: Installing into a metal door, glass or brick wall?
The steps in this printed manual are not suitable for installations into
metal doors, glass or brick walls. Do not install the cat flap in a fire
door as it will render it unfit for purpose.
For more information about installing into metal doors, glass or brick walls,
please download a full manual at surepetcare.com/pdf
Do not under any circumstances drill or cut the tunnel of the cat flap.
Ruler
Spirit level
Blu Tack
Flap opening dimensions = 142 (W) x 120mm (H) (5
1
2
When using power tools, follow all safety instructions provided with the product.
6
Sharp pencil
Electric jigsaw
Protective eye-wear
Ensure your cat(s) can pass through the flap before fitting.
To ensure your cat has unhindered access, first measure the height
from their tummy to the floor. This measurement is the distance
from the floor to the bottom edge of the hole you need to cut.
Mark this on your door.
Stick the external frame to the door aligning the bottom edge of the
hole with the measured mark. Use a spirit level to ensure the frame
is level, then run a sharp pencil around the inside edge of the frame.
Electric drill with a 6mm (1/ 4 '') drill bit
Cross head screwdriver
The screws and caps provided
9/ 1 6
to 4 ¾").
Publicidad
