Publicidad
Idiomas disponibles
Idiomas disponibles
Routine Maintenance
EN
Filter
1. Remove the filter and tap its basket gently.
Note: Do not attempt to clean the filter with a brush, a finger or sharp objects
to prevent damage.
2. Rinse the dust box and filter with water and dry them completely before
reinstalling.
Note:
·
Rinse the dust box and filter with clean water only. Do not use any detergent.
·
Use the dust box and filter only when they are completely dry.
22
Robot Sensors and Charging Contacts
Wipe sensors and charging contacts of the robot by using a soft and dry cloth,
as shown in the below figure:
AI Visual Sensor
Line Laser Sensors
Laser Distance
Sensor (LDS)
LED Auxiliary Lights
Edge Sensor
Bumper
Charging Contacts
Cliff Sensors
24h
Note: A wet cloth can damage sensitive elements within the robot and the
base station. Please use a dry cloth for cleaning.
Routine Maintenance
Charging Contacts
Clean the charging contacts and the signaling area of the base station with a
soft and dry cloth.
Auto-empty Vents
Clean the auto-empty vents of the robot and the base station with a soft and
dry cloth.
Carpet Sensor
Mop Pad
Remove the mop pad from the mop pad holder to replace it.
Battery
The robot contains a high-performance lithium-ion battery pack. Make sure
that the battery remains well-charged for daily use to maintain optimal
battery performance. If the robot is not used for an extended period of time,
turn it off and put it away. To prevent damage from over-discharging, charge
the robot at least once every three months.
EN
23
Publicidad
