cecotec ENERGYSILENCE AERO 5600 AQUA CONNECTED Manual De Instrucciones página 46

ENGLISH
Warnings:
- The remote control operates through RF Wireless digital transmission technology. If both
the fan and the lamp are equipped with a switch, turn on the fan at top speed and turn the
light on before using the remote control.
- If the fan or the light cannot be controlled through the remote control, check if the batteries
in the remote control are in good conditions and if they make good contact, that the positive
and negative electrodes are in the correct position, and if the batteries are charged.
- If the fan or the light cannot be controlled through the remote control, check if there are
other remote-controlled appliances in the same area and check if the transmitter buttons
are pressed. Appliances with similar remote-control systems may cause interference. This
does not include infrared remote controls.
- Pay attention to the appliance voltage. Too low a voltage may cause the remote control to
not work. The technical specifications are indicated in this manual.
- If the remote control is not going to be used for a long time, remove the batteries.
5. WI-FI CONNECTIVITY AND MOBILE APP
By scanning the following QR code you will be able to access the app download
option and an instruction manual explaining how to pair your appliance:
Automatic-scanning mode
1. Download the Cecotec app from Google Play or the App Store.
2. If it is the first time you use it, register an account. If not, log in.
3. Once you have entered the App, tap "+" on the top right-hand corner and tap "Air Treatment".
4. In the upper-right corner, tap on "Auto Scan", then long press the 1 h and 4 h buttons on the
remote control for 5 seconds until the remote control beeps.
5. The device will appear on the display–tap on it.
6. Enter the password of the Wi-Fi the mobile device is connected to and select "confirm".
Remember that the network must be 2.4 GHz.
7. Wait for the connection to complete.
Manual-connection mode
1. Download the Cecotec app from Google Play or the App Store.
2. If it is the first time you use it, register an account. If not, log in.
3. Once you have entered the App, press "+" on the top right-hand corner and tap "Aqua
Connected".
4. Turn on your device, you must make sure that you do not have any mode selected by
pressing the power button, the ceiling fan will go into standby mode. Then press the button
46 ENERGYSILENCE AERO 5600 AQUA CONNECTED | 5285 SUN CONNECTED