Descargar Imprimir esta página

ECOVACS DEEBOT T30S COMBO Serie Manual De Instrucciones página 38

Publicidad

Idiomas disponibles

Idiomas disponibles

No.
Malfunction
No signal found� Unable to return
5
to the Station�
DEEBOT returns to the Station
6
before it has finished cleaning�
7
DEEBOT is unable to charge�
Running is very loud during
8
cleaning�
DEEBOT gets stuck while
9
working and stops�
Possible Causes
The Station is incorrectly placed�
The Station is out of power or manually moved�
DEEBOT does not start cleaning from the Station�
The charging route is blocked� For example, the
door of the room with the Station is closed�
The room is so large that DEEBOT needs to return
to recharge�
DEEBOT is unable to reach certain areas blocked by
furniture or barriers�
DEEBOT is not switched ON�
DEEBOT's Charging Contacts are not connected to
the Station Pins�
The Station is not connected to the power supply�
Side brush and floating rubber brush are entangled�
Dust bin and filter are blocked�
DEEBOT is in Max Mode�
DEEBOT is tangled with something on the
floor (electrical wires, curtains, carpet fringing, etc�)�
DEEBOT might be stuck under furniture with an
entrance of similar height�
DEEBOT is stuck in a narrow area�
Solutions
Please place the Station correctly according to the instructions in the
[Charging DEEBOT]
section�
Check whether the Station is connected to power supply� Do not
manually move the Station�
It is recommended that DEEBOT start cleaning from the Station�
Keep the charging route clear�
Please enable Continuous Cleaning� For more details, please follow
the App instruction�
Tidy up the area to be cleaned by putting furniture and small objects in
their proper place�
Switch ON DEEBOT�
Make sure that the robot's Charging Contacts have connected to
the Station Pins and
flashes�
Check whether DEEBOT's Charging Contacts and the Station Pins
are dirty� Please clean these parts according to the instructions in the
[Maintenance]
section�
Make sure the Station is connected to the power�
It is recommended to clean the side brush, floating rubber brush, dust
bin, filter, etc� regularly�
Switch to Standard Mode�
DEEBOT will try various ways to free itself� If it is unsuccessful,
manually remove the obstacles and restart�
Please set a physical barrier, or set a Virtual Boundary via the
ECOVACS HOME App�
Tidy up the house� Or set a physical barrier� Or set a Virtual Boundary
via the ECOVACS HOME App�
37 EN

Publicidad

loading

Este manual también es adecuado para:

Ddx14Ch2367Fm2320