Haier I-MASTER 5 Serie Manual De Usuario página 11

2. This is an Air Fryer that works on hot air.
Do not fill the frying bucket with oil, frying
fat or any other liquid.
3. This appliance may produce some smoke
when you use it for the first time. This is
normal.
4. Preheating of the appliance is not necessary.
4. Using your Air Fryer
1. Plug into the wall outlet. (All lights
blinking once with a sound then all lights
off).
2. Hold the handle to remove the tray from
the main body. You can find it inside
the frying bucket. Place on a dry level
surface such as a table or work top and
plug in.
3. Put ingredients into the frying basket
[Fig. 1].
NOTE:
Do not put too many ingredients. Otherwise, the
result will not be good enough.
If you want to cook different ingredients at the
same time, check the suggestion cooking time
for every ingredient before cooking.
4. Put the frying bucket back into the main
body [Fig. 1].
5. Press ON/OFF Button to switch the product
on [Fig. 2].
6. Rotate the Dial to select your function
[Fig. 3]. Both clockwise and anticlockwise
will work. Press the Dial to confirm the
function.
7. Under MANUAL function, press Dial one time
[Fig. 4], the Temperature blinks, you can
rotate the Dial to adjust the temperature and
press Dial to confirm the temperature [Fig.
5,6], at the same time the time blinks, you
can rotate the Dial to adjust the time and
press Dial to confirm time, the air fryer starts
cooking [Fig. 7,8].
NOTE:
The temperature is adjusted in 5°C steps by
rotating the dial. The time is adjusted in 1
minute steps by rotating the dial.
If you do not operate within 2 minutes after the
temperature blinks, the appliance will enter
into standby, and within another 5 minutes
of no operation, the appliance switches off
automatically.
8. During cooking, you can not change the
temperature and time, you could press Dial
to pause the cooking process. "||" will
show in Display. Time and min will blink,
you can change the time by rotate the Dial
or click again to resume.
NOTE:
In the working state, only the time can be
adjusted, and the temperature cannot be
adjusted. The temperature can only be adjusted
in manual mode and before manual mode starts.
9. During cooking, you could press CANCEL
Button to cancel the cooking process or
return to the previous navigation mode.
10. You could check the cooking level of
the ingredients by checking from the
Transparent window or by taking out the
bucket.
NOTE:
During the cooking process, if you take out
and then put back the Air frying bucket, the
program resumes automatically.
Caution: After cooking process, the Air frying
bucket and basket, internal housing and the
food is all hot, please be careful.
11. During cooking, you could also check the
cooking level by pulling out the tray any
time, and put it back to resume work.
NOTE:
After pulling out the drawer, the heating tube
and fan stop working, all the keys cannot be
operated, put back in the drawer, the internal
light will automatically light up for 30 seconds,
and then automatically shut down.
12. During cooking, you could press INTERNAL
LIGHT Button to turn on and off the light
inside the chamber.
NOTE:
The internal light automatically turns on when
the Air fryer start cooking.
The internal light automatically turns off after
30 seconds without any action.
Activate and disable mute mode: press Light
button for 3 seconds.
13. When the cooking process is complete, the
buzzer sounded three times, display shows
the current temperature and timer shows
there's no time remaining. At this time,
the fan still runs and enters the standby
state 15 seconds later.
NOTE:
• In standby mode: only the on/off button
Led lights up.
• If there is no operation for 5 minutes
after cooking, the machine will turn off
automatically.
• It can also be turned off by keep pressing
11
GB