cecotec EnergySilence Aero 3050 Sky Manual De Instrucciones página 47

3. ASSEMBLING THE APPLIANCE
Installation requires the following tools: screwdriver, flat screwdriver, adjustable pliers or
spanner, ladder, wire cutters and electrical tape.
Warning
- To avoid electric shocks, turn the household power supply off before installing the ceiling
fan.
- If you hang the fan on a hook, the latter must withstand at least 100 kg.
Before assembling the fan
Fig. 2
- To avoid any damage, make sure that the place where you hang the fan has a distance of
2.3 m from the ground and 76 cm from any wall or obstacle.
- Ensure that the junction box is securely fastened to the building structure and can
support the full weight of the fan.
Assembling the fan
Downrod positioning
- Make sure that the building structure can hold the full weight of the fan.
- This fan can be installed on a normal or vaulted ceiling with a downrod. The hanging
length can be extended by using a longer downrod.
Assembling the fan based on ceiling type (Fig. 3)
1. Standard assembly
2. Angled assembly
Wooden ceiling
Fig. 4.
Use the 4 self-tapping screws and 4 washers provided to fix the mounting
plate to the ceiling.
Brick/concrete ceiling
Fig. 5.
1. Drill a φ8 mm hole in the masonry ceiling and insert the bolt.
2. Align the bracket with the hole and tighten it with the nut.
ENGLISH
ENERGYSILENCE AERO 3050
47