BH PROACTION G-635 Manual Del Usuario página 11

The selected column will flash, at which point you
can use the SPEED UP and SPEED DOWN keys to
change the values. Press the ENTER key to change
columns. Repeat this process until you have the
desired profile. Once the values have been defined
they will be recorded in the equipment's memory.
P 10
Km/h
14.5~16.0
13.5~14.0
11.5~13.0
10.5~11.0
8.5~10.0
7.5~ 8.0
5.5~ 7.0
4.5~ 5.0
2.5~ 4.0
1.0~ 2.0
P 11
Km/h
14.5~16.0
13.5~14.0
11.5~13.0
10.5~11.0
8.5~10.0
7.5~ 8.0
5.5~ 7.0
4.5~ 5.0
2.5~ 4.0
1.0~ 2.0
P 12
Km/h
14.5~16.0
13.5~14.0
11.5~13.0
10.5~11.0
8.5~10.0
7.5~ 8.0
5.5~ 7.0
4.5~ 5.0
2.5~ 4.0
1.0~ 2.0
3.6- PULSE RATE PROGRAM
This program allows you to do exercise on the
machine at a constant user-defined pulse rate. The
machine will vary the speed to ensure that the user's
pulse rate remains at the specified value.
E.g. If you have programmed it at 100 B.P.M (Beats per
minute) then as soon as you go above this value the
machine will start to slow down in steps of 0.5 km/h. On
the other hand, if you do not reach the programmed
B.P.M then the machine will speed up in steps of 0.5 km/
h until you do reach the programmed value.
To program it, press the START / STOP key and with
the red light on STOP, press the SELECT PROGRAM
key until the heart symbol appears on the display
(B in Fig. 1). Next, press the ENTER key until the
word PULSE is shown flashing on the screen. The
SPEED UP and SPEED DOWN keys are used to
increase or decrease the pulse rate value that you
wish to maintain during exercise.
ELECTRONICO G-635
Next, press the START/STOP key to start the exercise.
Use the SPEED UP and SPEED DOWN keys to change
the monitor's pre-programmed start-up speed.
3.7- EMERGENCY STOP
For the user's maximum safety, this unit is equipped
with a safety key (D in Fig. 1) and a START / STOP
button.
The safety key (D) must be inserted into its slot (see
Fig. 1) Otherwise the machine will not operate.
When you are using the machine always clip the
cord on the safety key to your clothing. Tugging on
the cord will pull the safety key out of its slot and
the machine will stop immediately. To restart the
machine simply put the key back into the key slot.
Remove the safety key (D) whenever the machine
is not being used and keep it out of children's reach.
Pressing the red button marked START / STOP will
also stop the unit immediately. To restart it, press
the button marked START / STOP again.
3.8- INCLINATION
The inclination function is independent of all other
functions. Each time the main switch (L) is set to
position "I", as shown in the assembly manual. The
display will show the level of inclination that you
finished off on during your last session.
You can adjust the level of inclination by pressing
the "INCLINE UP" or "INCLINE DOWN" buttons,
for a value of 1 to 10, depending on how you would
like to do the exercise.
Important. Do not change the inclination level of
your treadmill by propping it up on objects.
IMPORTANT. THE INCLINATION LEVEL MUST BE AT
ITS LOWEST SETTING BEFORE ATTEMPTING TO PUT
THE TREADMILL INTO THE FOLDED POSITION.
12
12
P 13 (H.R.C.)
Km/h
14.5~16.0
13.5~14.0
11.5~13.0
10.5~11.0
8.5~10.0
7.5~ 8.0
5.5~ 7.0
4.5~ 5.0
2.5~ 4.0
1.0~ 2.0
29/9/04, 09:07