Bertazzoni REF18WCPIXR/23 Guia De Instalacion página 17

> Depth alignment: working from the inside of
the door, after lifting up the magnetic seal on the
handle side and rotating the plastic covers on
the hinge side, adjust the panel position in the
Z-direction by adjusting the shoulder bolts and
setscrews with the 4mm hex key in conjunction
with each other finally locking each mounting po-
sition in place. [ 10 & 11 ].
Once the front panel has been adjusted,
check that the gasket has been repositioned
correctly to assure the door/drawer are
closing correctly and avoid operational
errors of the unit.
The product handle is not included in the appliace
packaging, but it has to be bought separately. For
handle installation, please refer to the instruction
included in handle's package.
EN
10
11
17