Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT: the appliances must be level with
one another.
1 – Attach both units to each other at the front us-
ing the 5 white plastic brackets to hold the units
together.
2 – Adjust the units in the back, so that the side pan-
els are perfectly parallel to each other. There are
visual cues that will aid with alignment.
3 – The gap ( C ) between the units must be the
same at the back and top. Measure the gap on all
edges and adjust if not equal.
A
B
4 – Once the gap is consistent on all edges, secure
the brackets. If the gap between the units is not
even, doors will not align properly.
Gap measurements vary according to the types
of units installed. Please refer to the table be-
low for correct gap measurements.
C
C
EN
19
Publicidad
