Bezzera VICTORIA BZVICTORIA3R Manual De Instrucciones página 38

3 - DESCRIPTION OF MACHINE
3.1 Description of operating cycle
The water, pumped from the mains supply by a motor pump, fills the service boilers. The water from the
mains supply arrives at the magnetic-drive pumps and through the pressure relief valves adjusted to
12 bar (1.2 MPa) and fills the coffee boilers. The water in the coffee boiler is passed, via an electrically-
controlled valve, through a food-grade brass group to infuse the coffee.
3.2 Description of commands
(Fig. 01 - Fig. 09)
1 Steam tap lever
2 Doser lever
3 Doser lever
4 Hot water dispensing lever
5 Display
6 Service boiler pressure gauge
7 Steam wand
8 Hot water wand
9 On/Off switch
10 Service boiler on/off lever
11 Filter-holder
12 Blind filter
13 1 cup filter
14 2 cup filter
3.3 Technical data
The VICTORIA espresso coffee machine is manufactured in 2 and 3 group versions.
The 2-group version is described in this booklet; however, the instructions for use and the layout of the
controls are the same for the other versions.
The A-weighted sound pressure level of the coffee machine is less than 70dB
Power supply
Heating element
Nominal power
Services heating element
Coffee heating element
Width "A"
Depth "B"
Height "H"
Net weight
Gross weight
Water input connector
Drain connector
(Fig. 02)
V~/Hz
V~
W
W
W
mm
mm
mm
kg
kg
VICTORIA
2 GROUPS
220 - 415 / 50-60 Hz
220-240
7300
5000
2000
820
680
560
100
140
38
BEZZERA VICTORIA
MOD.
VICTORIA
3 GROUPS
8300
5000
3000
1050
680
560
120
165
G 3/8"
G 3/4"