Publicidad
Idiomas disponibles
Idiomas disponibles
5.7 Group adjustment
You can access to the group menu from the main
menu by scrolling the image to the right or by
pressing the right arrow
5.7.1 Group enabling
You can enable/disable the required group by
pressing the ON/OFF key.
5.7.2 Group TEMPERATURE
adjustment
The water infusion temperature can be adjusted
by pressing the + and - keys. The temperatures
can be set between 85°C (185°F) and 96°C
(205°F).
5.7.3 Groups CHRONO Activation
You can enable/disable the display of the dispen-
sing time by pressing the CRONO key which is
shown in seconds on the dispensing screen.
5.7.4 Group washing
The selected group can be washed by pressing
the WASH key.
This procedure must only be carried out after put-
ting the blind filter supplied in the filter holder.
Press the type of wash you want to carry out: nor-
mal (five 10-second consecutive flushes) or inten-
se (ten 10-second consecutive flushes).
5.7.5 Groups COUNTER display
You can display the number of doses dispensed by
pressing the COUNTERS key which will bring up
the following menu:
where you can display the number of doses dis-
pensed on each group divided by the type of
drink dispensed.
5.8 PROFILE display
By pressing the PROFILES key, you can display the
"profile manager" menu in which it is possible to
view the profiles assigned to each key. You can
also consult the list of all the profiles created.
The name of the profile assigned is shown for
each of the dose keys.
5.8.1 PROFILE creation
It is possible to create a new profile by directly se-
lecting the key to which it is to be assigned via the
group menu or by accessing the profile manager.
To create a new profile and to assign it directly to
a specific dosing key, access the group menu of
the desired dosing group
Pressing the dose button for which you want to
assign the new profile will display the selection
screen of the operation to be performed
42
BEZZERA VICTORIA
MOD.
Publicidad
