Descargar Imprimir esta página

Bezzera VICTORIA BZVICTORIA3R Manual De Instrucciones página 51

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 89
Problem
The flow of coffee is excessive
The coffee dispensed is too cold Possible causes:
The coffee dispensed is too hot
Troubleshooting/
Solution
The coffee is dispensed too
quickly and the cream is lighter
than usual.
Possible causes:
1 - The coffee is ground too
coarsely.
2 - The coffee in the filter holder
has not been pressed firmly
enough.
3 - The dose in the filter holder
is too small.
4 - The pressure released
by the pump is too high
(> 10bar - 1 MPa).
1 - The cups are cold.
2 - The filter holders are cold.
3 - The coffee is ground too
finely.
4 - The machine water circuit is
dirty (limescale).
5 - The group is cold.
Possible causes:
1 - The machine is covered by
something that prevents it
from cooling.
2 - The machine was installed
in a position that does not
allow air circulation.
51
BEZZERA VICTORIA
MOD.
Advice
In cases 1-2-3, adjust the
grinding
and/or
coffee.
In case 4, contact a technician.
In the 1st case, use the cup
warmers. In the 2nd case, keep
the filter-holder inserted on the
group.
In the 3rd case, adjust the
grinding of the coffee.
In the fourth and fifth cases, call
a specialised technician.
Cool the machine down.
dosing
of

Publicidad

loading