WIKA PEW-1000 Manual De Instrucciones página 21

6. Maintenance and cleaning
6. Maintenance and cleaning
6.1 Maintenance
This instrument is maintenance-free.
Repairs must only be carried out by the manufacturer.
This does not apply to the battery replacement.
6.2 Cleaning
Only use commercially available and solvent-free cleaning agents.
6.3 Battery handling
For battery replacement observe the following instructions:
Only change the batteries in a dry environment
■
Do not use rechargeable batteries
■
Only use approved batteries, see chapter 4.2 "Battery".
■
Do not use power tools for screwing in.
■
During longer times of inactivity, remove the batteries from the instrument.
After changing the battery, the command "Battery changed" must be sent in the app "myWIKA wireless
device" under Actions or alternatively via the cloud.
Attention: After executing the "Battery changed" command, do not disconnect the battery from the
sensor for at least 24 hours.
WIKA operating instructions pressure sensor, model PEW-1000
EN
21