iNSTALLATiON REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
[]
Pliers (that open to
[]
Flashlight (optional)
39.5 mm [19/16"])
Tools needed for insta(iation
[]
Open end wrenches 13 mm
[]
Level
(1/2") and 14 mm (9/16")
[]
Wood block
[]
TORX T20 °t Security
[]
Ruler or measuring tape
screwdriver
[]
6.3 mm (1/4") nut driver
Parts supplied
Alternate
Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, contact your
authorized Maytag distributor.
t
t
If you have
You will need to buy
Laundry tub or standpipe
Sump pump system (if not already
taller than 2.4 m (96")
available)
Overhead sewer
Standard 76 L (20 gal.), 762 mm
(30") tall drain tub or utility sink and
sump pump (available from local
plumbing suppliers)
Floor drain
Siphon break, Part Number
285834; additional drain hose,
Part Number 8318155; and
connector
kit, Part Number 285835
Drain hose too short
1.2 m (4 ft) drain hose extension
kit, Part Number 285863
H
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Transit bolt hole plug (4)
E. Removable
tie strap
F. Drain hose
G. Hose clamp
H. Power cord adapter kit
Options
Pedestal
You have the option of purchasing pedestals separately for this
washer. The pedestal will add to the total height of the washer.
Optional pedestal
Parts supplied for PD Models:
Pedesta_
Approximate
Color
Part Number
Height
height with washer
73 mm (2%")
1207 mm (47.5")
White
WHP0400VW
Service door lock cam
Foam pads
t<_TORX and T20 are registered trademarks
of Acument
Intellectual
Properties, LLC.
4