Introduction / Safety advice
Air paint spray gun PDFP 500 B2
Introduction
Q
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Correct Usage
Q
This compressed air-operated device is only intended
for the application / spraying of solvent-containing
and water-dilutable paints, glazes, primers, varnishes,
automotive topcoats, stains, wood preservatives,
pesticides, oils and disinfectants. The device is not
suitable for working with dispersion and latex paints,
alkalis, acidic coating materials, granular and par-
ticulate spraying material or injection and non-drip
materials. Any other use or modification shall be
deemed to be improper use and could give rise to
considerable risk of accident. We will not accept li-
ability for loss or damage arising from improper use.
The device is intended for private, domestic use only.
Features and Fittings
Vent
1
Lid of the gravity flow cup
2
Gravity flow cup
3
Stroke stop screw (paint quantity regulation)
4
Regulator for round / broad jet
5
Compressed air connection
6
Regulator for air quantity control
7
Trigger
8
Nozzle head
9
Needle
10
Spring
11
30 GB/MT
Brush
12
Filter
13
Interior screw thread (flow cup)
14
Scope of Delivery
Q
1 Air paint spray gun PDFP 500 B2
1 Gravity flow cup
1 Lid for the gravity flow cup
1 Cleaning brush
1 Filter
1 Operating Instructions
Technical Data
Q
Required air quality:
Air consumption:
Working pressure:
Volume flow:
Nozzle size:
Gravity flow cup:
Recommended viscosity: 18–23 DIN / sec.
Sound pressure level:
Values determined in accordance with EN 14462.
Safety advice
Q
safety advice and instructions.
Failure to observe the safety advice
and instructions could result in serious injury and /
or damage to property.
Keep all the safety advice and instructions
in a safe place for future reference!
RISK OF RECOIL FORCES!
High working pressures can give rise to recoil
forces that under certain conditions can result
in danger from continuous loading.
DANGER OF SUFFOCA-
TION! Working with nitrogen presents
a danger of suffocation! Work in well
ventilated spaces only.
purified, free of conden-
sate and oil
max. 380 l / min
max. 3 bar
typically 130–160 ml / min
Ø 1.4 mm
500 ml
72.1 dB(A)
Read all the