Publicidad
Idiomas disponibles
Idiomas disponibles
GB
ENGLISH
Check the collection bag at regular intervals for any wear
and aging.
After every work stint, clean the machine thoroughly
to remove all dust and debris, and repair or replace any
faulty parts.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp cloth
making.
Keep all nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition;
STORAGE
The appliance must be stored in a dry place and pro-
tected from frost.
Lock the device in a proper place to protect it from
unauthorised use.
DISPOSAL
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but
dispose of it in an environmentally friendly manner.
Please dispose of the device itself at an according collec-
ting/recycling point. By doing so, plastic and metal parts
FAILURE REMOVAL
Failures
Engine does not start
Roller does not rotate
Engine output drops
Work result unsatisfactory
unbalanced run, device vibrates
20
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specified in these instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries of
the user. The manufacturer will not be liable for any such
damage.
Please contact our service department if you need acces-
sories or spare parts.
Store idle power tools out of the reach of children.
Let the engine cool down, before you store the device in
a closed room.
can be separated and recycled. Information concerning
the disposal of materials and devices are available from
your local administration.
Causes
No power supply.
Roller blocked
Toothed belt defective
Working depth too large
Lawn too high for scarifying
Working depth too large
blades are worn out
Blade is damaged
Removal
Check the socket outlet, cable, line
and plug, and carry out repairs by a
qualified electrician if necessary
Check roller
Visit a specialist workshop
Adjust to a smaller working depth
Mow the lawn
Adjust to a smaller working depth
Visit a specialist workshop
Visit a specialist workshop
Publicidad
