Publicidad
Idiomas disponibles
Idiomas disponibles
a. If you don't set the power within 1 minute, the induction hob will automatically switch off.
You will need to start again at step1.
b. You can modify the heat setting at any time duringcooking.
c. If slide along the "—", power will vary from stage 1 to stage 9.
If the display
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cookingor,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed on it.
When you have finished cooking
1. Turn the cooking zone off by slide along the "—" to the left point, and then
hold
for 1 second .
Make sure the power display shows "0", then shows "H".
2.Turn the whole cooktop off by touching
3. Beware of hot surfaces
' H ' will show which cooking zone is hot to touch. It will disappear when the surface has
alternately with the heat setting
and then
O
...
. .
-143-
Publicidad
